BaCe_(0.5)Zr_(0.4)Y_(0.1)O_(3-δ)粉体的溶胶-凝胶法和高温固相法制备及性能表征Preparation and Characterization of BaCe_(0.5)Zr_(0.4)Y_(0.1)O_(3-δ) via Sol-Gel Method and Solid State Reaction
张翠娟;赵海雷;王治峰;李雪;沈薇;
摘要(Abstract):
分别通过溶胶-凝胶法和高温固相反应法制备了BaCe0.5Zr0.4Y0.1O3-δ粉体。采用热重-差热分析(TG-DTA),粉末X射线衍射(XRD),扫描电子显微镜(SEM),傅立叶红外衍射(FT-IR),N2吸附-脱附等方法对所制备的粉体进行了表征。结果表明:用溶胶-凝胶法在1200℃×10 h可以合成纯的BaCe0.5Zr0.4Y0.1O3-δ粉体,合成温度比传统的高温固相反应法降低400℃左右;溶胶-凝胶法合成粉体具有多孔结构特征,与固相法合成粉体相比具有较高的比表面积。但致密化试验表明:溶胶-凝胶法合成粉体与固相法合成粉体相比具有较低的烧结活性。溶胶-凝胶法合成粉体颗粒表面残余的有机基团和颗粒内部的大量微孔将在致密化过程中产生空间位阻,从而影响高温下原子的迁移,阻碍材料的致密化过程。
关键词(KeyWords): 高温质子导体;BaCe0.5Zr0.4Y0.1O3-δ;溶胶-凝胶法;高温固相反应法;稀土
基金项目(Foundation): 国家自然科学基金资助项目
作者(Authors): 张翠娟;赵海雷;王治峰;李雪;沈薇;
参考文献(References):
- [1]Iwahara H,Shimura T,Matsumoto H.Protonic conduction inoxides at elevated temperatures and their possible application[J].Electrochemistry,2000,68(3):154.
- [2]Schober T.Applications of oxidic high-temperature proton con-ductors[J].Solid State Ionics,2003,162-163:277.
- [3]Iwahara H,Esaka T,Uchida H,Maeda N.Proton conductionin sintered oxides and its application to steam electrolysis forhydrogen production[J].Solid State Ionics,1981,13(4):359.
- [4]Iwahara H,Uchida H,Ono K,Ogaki K.Proton conduction insintered oxides based on BaCeO3[J].J.Electrochem.Soc.,1988,135(2):529.
- [5]Iwahara H,Yajima T,Hibino K,Ozaki K,Suzuki H.Protonicconduction in calcium,strontium and barium zirconates[J].Sol-id State Ionics,1993,61(1-3):65.
- [6]Liang K C,Du Y,Nowick A S.Fast high-temperature protontransport in nonstoichiometric mixed perovskites[J].Solid StateIonics,1994,69(2):117.
- [7]Iwahara H.Proton conducting ceramics and their applications[J].Solid State Ionics,1996,86-88:9.
- [8]Ryu K H,Haile S M.Chemical stability and proton conductivi-ty of doped BaCeO3-BaZrO3solid solutions[J].Solid State Ion-ics,1999,125(1-4):355.
- [9]Zuo C,Dorris S E,Balachandran U,Liu M L.Effect of Zr-doping on the chemical stability and hydrogen permeation of theNi-BaCe0.8Y0.2O3-δmixed protonic-electronic conductor[J].Chem.Mater,2006,18(19):4647.
- [10]Azad K A,Irvine S T J.Synthesis,chemical stability and con-ductivity of the perovskites Ba(Ce,Zr)1-xScxO3-δ[J].SolidState Ionics,2007,178(1-10):635.
- [11]王吉德,宿新泰,刘瑞泉,胡云霞,谢亚红,岳凡.钙钛矿型高温质子导体研究进展[J].化学进展,2004,16(5):829.
- [12]PhuléP P,Grundy C D.Pathways for the low temperature syn-thesis of nano-sized crystalline barium zirconate[J].Mater.Sci.Eng.B,1994,B23(1):29.
- [13]Zhong Z M.Stability and conductivity study of the BaCe0.9-xZrxY0.1O2.95systems[J].Solid State Ionics,2007,178(3-4):213.
- [14]冯骏,谷景华,张跃.质子导体SrCe0.9Y0.1O3-δ的柠檬酸法合成研究[J].中国稀土学报,2006,24(5):633.
- [15]Cervera B R,Oyama Y,Yamaguchi S.Low temperature synthe-sis of nanocrystalline proton conducting BaZr0.8Y0.2O3-δby sol-gelmethod[J].Solid State Ionics,2007,128(7-10):569.
- [16]贾定先,马桂林,石慧.BaCe0.8Y0.2O3-δ的溶胶-凝胶合成及其电性能[J].化学学报,2002,60(10):1737.
- [17]刘瑞泉,宿新泰,王吉德,岳凡,谢亚红,胡云霞.BaCe0.9Nd0.1O3-δ柠檬酸盐法合成、表征及其在中温区的电导率[J].无机化学学报,2004,20(1):57.
- [18]Chandler C,Roger C,Hampden-Smith M.Chemical aspects ofsolution routes to perovskite-phase mixed-metal oxides from metal-organic precursors[J].Chem.Rev.,1993,93(3):1205.
- [19]范宝安,何灏彦,易冬亚.络合-燃烧法制备BaZr0.68Ce0.17Y0.15O2.925质子导体[J].电源技术,2006,30(4):278.
- [20]汪洁,丁伟中,方建慧,朱冬冬,吴敏艳.BaCe0.5Zr0.4Y0.1O3-δ的溶胶-凝胶法制备及其性能[J].中国稀土学报,2005,23(4):449.
- [21]Zhang J C,Wen Z Y,Huang S H,Wu J G,Han J D,Xu X X.High temperature proton conductor Sr(Ce0.6Zr0.4)0.9Y0.1O3-δ:preparation,sintering and electrical properties[J].Ceramics In-ternational,2008,34:1273.
- [22]Chervin N C,Clapsaddle J B,Chiu W H,Gash E A,Satcher HJ,Kauzlarich M S.Aerogel synthesis of yttria-stabilized zirconiaby a non-alkoxide sol-gel route[J].Chem.Mater.,2005,17(13):3345.
- [23]Nyquist A R,Kagel O R.Infrared spectra of inorganic com-pounds(3800~45 cm-1)[M].New York:Academic Press,INC,1971.10.
- [24]Sin A,Odier P.Gelation by acrylamide,a quasi-universal me-dium for the synthesis of fine oxide powders for electroceramic ap-plications[J].Adv.Mater.,2000,12(9):649.
- [25]Magrez A,Schober T.Preparation,sintering,and water incor-poration of proton conducting Ba0.99Zr0.8Y0.2O3-δ:comparisonbetween three different synthesis techniques[J].Solid StateIon-ics,2004,175(1-4):585.